Houseplants That Start With B

Are you looking for a way to add beautiful houseplants to your home? Not just any houseplant but ones that starts with the letter “B”. 

We have compiled the Top 8 houseplants that start with B that can add colour to your home, office or garden. Including their respective characteristics, and how to care for and maintain them.

7 Houseplants That Start With B

Numerous houseplants start with the letter “B”. Most of them are tropical houseplants that grow in mountains or places with cool climates. 

Among all of these houseplants that can add beauty to your home and environment, we have selected the best among them. They are worth trying if you want the best for your home. These houseplants include

1. Baby Rubber Plant

Also known as Peperomia obtusifolia, originated from South America. This houseplant grows in popularity with a height of up to 10 in (25 cm) when matured.

It’s thick with waxy leaves and upright growth habit, that’s the origin of its name “Baby rubber”. Due to its beauty, it makes it stands out among all other houseplants though it usually looks small especially when placed on a table. You can place it in your office, home or any other place where you need a little touch of beauty and an attractive smell.

Furthermore, it has rounded leaves that are traditionally dark green, although the plant’s newer variegated types are the most sought-after. 

However, if you are seeking the most handsome leaves, you should look out for those varieties of baby rubber plants marbled with golden yellow or creamy white.

Care Instructions

Caring for this plant is very easy when you know the basic requirements that can keep it thriving. Some of these basic requirements include:

A. Light

It is important to grow this plant with the right amount of sunlight. However, the plant thrives when placed in bright indirect sunlight. Avoid placing the plant in a spot where it is exposed to direct sunlight as it will burn or cause damage to the plant.

If you notice that the small leaves of your plant or it has leggy stems, it is a clear indication that the plant is not getting enough sunlight. This will cause the variegated plant to lose its colour.  So, always watch out for the position of your plant.

B. Water

Feed your baby rubber plant with the right amount of water. It is important to keep the potting mix or your soil lightly moist, especially during the spring and fall seasons when the plant is actively growing. However, allow the soil surface to dry out before your water. 

Avoid overwatering your plant as it will cause the crown to rot which can kill your plant. You can get a soil moisture meter to examine the plant and know exactly when to water your plant.

Furthermore, ensure that you water during the winter seasons as the plant’s growth will be slower.

C. Soil Mix

The best soil mix for this plant is the peat moss-based mix, such as the African violet potting mix. Do well to ensure that you grow the plant with this right mix. You can make the organic mix with peat, moss or perlite. 

Furthermore, ensure that the soil is porous holes for easy drainage of water.

D. Humidity

The humidity level must be moderate to high at least 50% relative humidity. However, to avoid low or high humidity levels, you can set your plant on a tray of wet pebbles or use a cool-mist humidifier to give this tropical native the moisture it craves. 

If you notice that the tip of your leaves is turning brown, it shows that the humidity level is low or dry air and must be resolved immediately to avoid further problems.

E. Temperature

The average room temperature must be between 65-75°F/18-24°C. If you should place your plant in a room or place with cold air or high temperature, it will cause the leaves to fall off. 

During winter, the plant can tolerate a minimum temperature of 60°F/16°C in winter.

F. Fertilizer

Ensure that you feed your baby rubber plant with the right fertilizer which is a balanced water-soluble fertilizer diluted by half every 2 weeks, especially during the spring to fall season.

G. Repotting

It is important to report your plant when necessary during spring. This is to freshen the potting mix. However, do well to keep the potting mix loose. Ensure not to pack it down because the roots need air as well as water.

H. Propagation

Propagate your baby rubber plant by taking stem tip cuttings during spring and early summer. However, it roots better when done in an easily moist perlite or potting mix.

I. Common Problems Of Baby Rubber Plants

There are some common problems that this plant usually faces such as

A. Dropped Leaves

This occurs when the temperature is below 55°F/13°C and it causes lower leaves to fall off. So to remedy the problem, do well to place the plant in the right place to increase its temperature range.

B. Variegated Leaves

This happens when the variegated leaves that turn green are not getting enough sunlight. So ensure that you expose your plants to light at a spot near a window, 

C. Wilt Leaves

This is a common problem that affects the leaves as a result of overwatering is the wilting of the leaves which might result in root rot. Avoid overwatering your plant. Test the moisture level of the potting soil mix with your finger or soil meter.

Furthermore, ensure that the pot has drainage holes to allow the excess water to escape. If you want to cover up a plain nursery pot, slip it into a cachepot a decorated planter without drainage holes.

D. Notice Dry, Corky Scabs

They are also one of the causes of overwatering. The problem is more common in winter when growth has slowed and the plant needs to drink up much water.  So, cut down on the watering. However, if the plant is hopelessly overwatered your plant, repot it right away in a fresh potting mix.

Furthermore, It’s normal for older leaves to die. But if you see a lot of dry, shrivelled leaves, it may be caused by excess soluble salts from fertilizer. You can easily flush built-up salts by slowly pouring room-temperature water over the potting mix a couple of times. 

E. Watch For Pests

The most common pests that attack your baby rubber plant are mealybugs, scale insects, and spider mites. 

To get rid of them, isolate an infested houseplant and treat it right away to prevent pests from moving on to your other indoor plants. You can also apply Insecticides soaps or neem oil on the plant as it is very effective.

Read Also: Houseplants That Start With A

2. Baby Tears

Baby’s Tears plant gets its name from the tiny, round leaves cascading down slender, fragile stems. It has other common names such as Mind-Your-Own-Business and Irish Moss. It originated from Italy and has a height of up to 6 in (15 cm). 

This plant is a fast-growing evergreen that has a low, spreading habit that spills beautifully over the sides of a container. It won’t grow far as the creeping stems need to have contact with the soil. 

When exposed to enough light, a baby’s tears can produce tiny, single flowers in the leaf axils. It typically blooms in summer. 

Furthermore, this plant seems well-suited in a moist environment of a terrarium, it is invasive and will crowd other plants.

Care Instructions

Below are the ways to care for your baby tears plant. They include:

A. Light

The baby tears tend to grow in low light, preferably a bright indirect light. So avoid placing this plant at a place or spot where it will be exposed to direct sun as it can cause damage to the plant such as the scorching of the leaves.

B. Water

Ensure that you water the plant and keep the potting medium moist at all times. Avoid growing it in dry soil as it doesn’t tolerate such soil.

C. Soil Mix

Grow your baby tears plant in any good potting mix preferably African violet potting mix as it works better and also maintains moisture which is an essential need of the plant.

D. Humidity

This plant thrives in high humidity. Ensure that the humidity level is at least 50%. Any humidity level lower than this isn’t acceptable. You can increase the humidity of your room with a humidifier.

E. Temperature

The average room temperature must be between 60-75°F/16-24°C. However, it is important not to place the plant at a temperature range below the suitable temperature. It will cause some damage to the leaves of your plant.

F. Fertilizer

Ensure that you feed your baby tears plant with a balanced water-soluble houseplant fertilizer diluted by half every 2 weeks from spring till summer.

Avoid feeding the plant during winter as the plant will be dormant.

G. Repotting

Repot your plant during spring when you notice that the roots have outgrown the pot. However, it will make beautiful ground cover when planted under tall potted plants.

While doing so, do well to combine the baby’s tears with plants that prefer constant moisture.

H. Propagation

Baby’s tears plants have shallow roots and can be propagated by division. To do this, you can divide the plant into smaller clumps by gently pulling it apart. However, be sure that there are roots attached. 

You can just set the separated plants on top of potting medium, water, and they’ll readily take root.

3. Bird Nest Fern

Also known as Asplenium nidus, originated from Southeast Asia and Tropical Australia. It is one of the easiest types of ferns to grow indoors. This tropical native is fast-growing and will live for many years if provided with good care and maintenance. It has a height of up to 2 ft (60 cm) when planted in a container indoors.

In its natural habitat, this fern grows as an epiphyte, a plant that grows on trees in warm, moist, tropical rainforests. However, despite its tropical beginnings, it adapts well to being a houseplant. 

Furthermore, the fern tends to grow in the form of a deep rosette of large, shiny, spear-shaped fronds. New fronds unfurl from the centre of the plant.

Care Instructions

You can care for these plants by providing these essential needs such as

A. Light

The bird’s nest fern tends to thrive in bright, indirect sunlight. Avoid placing it in direct sun as it will damage the fronds of the plant. Do well to turn the pot quarter every week for even growth.

B. Water

Water the plant effectively to keep the soil evenly moist. Do well to use a pot with drainage holes to grow your plant to avoid the issue of overwatering. 

Furthermore, water the potting mix and not the centre of the rosette, otherwise it can easily rot. 

Also, water your soil less in winter when growth is slower. If you notice yellow fronds, it is a clear sign that your plant has been overwatered. To remedy the problem, pause on your water until the soil absorbs it.

C. Soil Mix

The best type of soil mix suitable for this plant is peat moss based, such as African violet potting mix. 

D. Humidity

Ada tropical fern loves moist air. The humidity level must be above 50%, so therefore, any humidity below will only cause damage to the plant as well the leaves. 

To increase the humidity level and also add moisture, you can use a humidity tray or cool-mist room humidifier to add. A clear sign of a low humidity level is the brown of the leaf tips.

E. Temperature

The perfect temperature range for your plant is slightly cool to the average temperature between 60-75°F/16-24°C. Any range below will cause damage to your plant.

F. Fertilizer

Do well to feed your plant with the best suitable fertilizer which is the balance water-soluble fertilizer with an NPK of 10-10-10 at a half strength. This must be done mostly in the spring and summer.

Avoid fertilizing your plant during the winter as the plant is dormant at that time.

G. Repotting

Report your young plants during the spring every couple of years or when the roots fill the pot. 

If you find that the roots are attached to the pot, run a knife around the inside to loosen them before you can remove the root ball. You might also need to break the pot to remove it. 

Furthermore, do well to use a container with drainage holes to avoid soggy soil. Look out for your plant to avoid packing down the potting mix.

H. Propagation

You can propagate your plant through spores which is difficult to do especially if you are a home grower.

I. Common Problems Of Bird Nests Fern

The problems of the bird’s nest fern include 

A. Brownish Fronds

The problems include the outer fronds turning brown. Though this is normal you can still cut them off at the base to keep the plant neat.

Those upright fronds tend to be dust catchers. Keep the broad, shiny fronds dust-free by spraying with water and gently wiping them with a damp cloth. Avoid using leaf shine products on ferns because it can severely damage their delicate fronds.

B. Pests

The most pests that will infest your bird nest fern plant are the scale insects that look like small, brown discs on fronds. 

If you find an invasion of these pests on your plant, spray with soapy water followed by clean water. Don’t use insecticides on ferns because they are easily damaged by chemicals.

Must Read : Philodendron Birkin Care Guide | 3 Best Methods To Propagate

4. Blushing Philodendron

Also known as Philodendron erubescens, originated from Colombia. It is a sport glossy with heart-shaped leaves along wine-coloured stems, which makes it a standout among houseplants. 

Like many popular indoor plants from this tropical tree-climbing family, this Philodendron is eager to move upward with its elongated heart-shaped leaves will reach about 10 inches (25 cm) long. 

They often emerge reddish, turning green as they mature. Some hybrids maintain a red or coppery blush underneath. 

Although mostly hidden by abundant foliage, the vivid red stems are attention-grabbing. You can show them off by putting a young plant in a hanging basket, allowing the leaf-studded stems to cascade.

Care Instructions

Below is the essential care that your plant needs. They include

A. Light

The plant thrives in bright, indirect sunlight. It will help to grow plenty of large leaves that maintain their colour. 

However, when you notice small leaves or long spaces between leaves, it shows that the plant is not getting enough light. 

So do well to move your philodendron plant to a brighter location, but not into the direct sun which can scorch its leaves. 

You can also get an artificial light in case you need to add up to the one you have. A grow light isn’t a bad idea.

B. Water

Water the plant thoroughly, then allow the top 1-inch (2.5 cm) of soil to dry out before watering again. 

Also, water the plant less in winter, when growth is slow. However, avoid over-watering as it may cause leaves to turn yellow. 

Furthermore, ensure that you use room-temperature water as it can hold.

C. Soil Mix

Add the peat moss-based potting mix with added perlite for fast drainage. The ideal potting mix is the African violet potting mix.

D. Humidity

Ensure that you maintain 45% relative humidity or higher. Indoor air can become extremely dry in winter without noticing it. 

So, it is a good idea to use a humidity monitor near your tropical plants, rather than guess. Use a cool-mist room humidifier to boost humidity for your tropical houseplants. 

E. Temperature

The average temperature is between 65-80°F/18-27°C. It can tolerate a minimum of 60°F/16°C in winter. 

However, don’t expose your houseplants to cold blasts from an entryway or set them near a heat or AC vent.

F. Fertilizer

Do well to feed your plant once a month during spring and summer with a balanced water-soluble fertilizer. Avoid fertilizing in fall and winter, when growth is slow.

G. Repotting

The best time to report your blushing philodendron is during spring or early summer as the plants will be beginning their most vigorous time of growth. If roots have filled the pot or are growing out of the drainage holes, it’s time to pot up. 

To repot your plant, follow these steps:

A. To remove the plant from its original pot, turn it on its side and ease the plant gently from the pot. If the plant won’t budge, you may have to tap the bottom of the pot on a hard surface to loosen it. You can also try sliding a trowel or knife around the inside of the pot, taking care not to damage the root ball.

B. If the roots are coiled around the bottom, use your fingers to pull them straight. 

C. Endeavor to prune the roots before potting. 

Pruning the plant will help to stimulate the new root growth and also establish it in its new container.

D. Partly fill the new container with a potting mix. 

E. Center the plant in its container, and fill the sides of the plant with additional mix. Tamp it down with your fingers, especially around the sides of the pot.

F. Water thoroughly to moisten roots and to settle potting mix. Add more mix if needed.

H. Propagation

To propagate your blushing philodendron plant, 

A. Take 3-4/7-10 cm-long stem tip cuttings in spring or early summer. 

B. Cut below a leaf node, the exact place where the leaf is attached to the stem. Nodes contain cells that will develop new roots. 

C. Insert stem cuttings in a slightly moist potting mix.

I. Common Problems Of Blushing Philodendrons

Below are the common problems that can affect your plant. They include:

A. Yellow Leaves

If you notice that the leaves of your blushing philodendron plant are yellow, it is a clear sign that your plant has been overwatered or that the cold drafts from the entryways must have affected your plant. 

To remedy the problem, avoid watering your plant for some time until the water has dried up.

B. Pests

The most common pests that infest your plant are aphids and fungus gnats.

Aphids are soft-bodied insects. They suck plant juices from the stems and undersides of leaves, excreting honeydew which is a sticky substance that may attract ants. 

Also, when the soil or plant is too wet, peaty potting mixes, it attracts fungus gnats. They’re not as harmful to plants but they can multiply and then move on to other indoor plants. 

They are not easy to spot as it is a tiny, black flies that crawl or hop above the potting mix.

To get rid of these, just isolate any infested houseplant and treat it right away. You can treat them with insecticide soap or neem oil. You can also use other horticultural oils.

5. Boston Ferns

Also known as Nephrolepsis exaltata originated in Central America during the Victoria era. 

Its grown fronds are generally 1-3 ft (30-90 cm) long. These long, arching fronds are covered with leaflets called pinnae. These fronds tend to make the plant lush and a houseplant that’s ideal for a pedestal or a hanging basket. 

Furthermore, it is native to tropical rainforests, where the relative humidity stays well above 70%. This common fern is non-toxic to pets.

Care Instructions

Below are the basic care and maintenance that’s required of you for your plant. They include:

A. Light

This plant thrives in bright, indirect light. Avoid placing the plant in a spot where it will be exposed to direct sun. 

Ensure that you give the plant a quarter turn every week to expose all sides to light and be able to achieve even growth.

B. Water

Water your plant as and when due. It helps to keep your soil constantly moist, but not soggy. 

While watering your plant, do well to keep a close watch on the large ferns and hanging basket ferns because they can dry out quickly. 

Avoid overwatering or underwatering your plant as it might cause some diseases on your plants such as the wilted or drooping fronds. 

Furthermore, always use room-temperature water for your houseplants. This is a result of the damage which the use of cold water will shock to these tender tropicals.

C. Soil

Grow your boston fern on a peat moss-based potting mix, such as African violet potting mix or you can try a half-half mixture of peat moss and all-purpose potting mix if you want to make your homemade.

D. Humidity

Try to maintain moist air of around 50% relative humidity near the fern. If the room humidity isn’t enough, you can use a cool-mist room humidifier for best results. 

Furthermore, misting with room-temperature water helps, if you can mist a few times a day.

E. Temperature

The average temperature of the room for your boston fern plant must be between 65-75°F/18-24°C

F. Fertilizer

Feed the plant with the right amount of balanced water-soluble fertilizer diluted by half every 2 weeks year-round. 

G. Repotting

You should repot your plant during spring when the roots have filled the container. 

A. You should move the fern to a pot that’s only slightly larger. 

B. Afterwards, remove the fern from its container and prune off about 1/4 of its roots. Then repot it in the same pot as before. This is the perfect time to divide the fern if you want.

H. Propagation

The best suitable propagation is division. To do so, you need to:

A. Cut away new plants that grow outside the main root ball and pot them separately. You can also divide a large root ball into smaller clumps with a sharp knife and pot them up. 

The best time for the propagation of your plant is during spring as it is the beginning of its most vigorous time of growth.

I. Common Problems Of Boston Fern

The most common problems include:

A. Brown Leaflets

They are often caused by dry air. So, to remedy the problem, you should avoid placing your fern near the heat or AC vent because fluctuations in temperature can shock the plant and also cause the browning of leaflets. 

You can trim brown leaflets with scissors, if you want, to keep them looking neat. Older, lower fronds will naturally turn brown when they die and should be cut off.

B. Wilted Fronds

When you notice that your fronds are yellow and wilted, it is a sign of overwatering. 

To remedy the problem, you should reduce the amount of water and trim off damaged fronds. You should also use a container with drainage holes to prevent soggy soil.

Furthermore, check the plant’s roots to see if they have rotted. If the roots are mostly black, get rid of them.

C. Pests

The most common pests that affect your boston fern are scales and spider mites. 

Scales look like small, brown discs on leaflets. Sometimes the brown spores on the undersides of leaflets are mistaken for scale insects. You will easily recognize the spores because they appear in two rows under each pinna. 

To remove scale insects, scrape them off with your fingernails. Avoid using insecticides on ferns because they are easily damaged by chemicals.

Spider mites are less common, but can cause more damage. You will notice a fine webbing between fronds. 

To get rid of this pest, cut off the badly affected fronds. Avoid using an insecticide as it can damage fronds. 

However, if it’s warm enough, you can take your fern outdoors to wash it off with tepid water to dislodge these mites. 

You can also place your fern in the shower. Ensure that you mist your fern regularly will prevent an invasion of spider mites that prefer drier conditions and your fern will love the humidity.

6. Brake Fern

Also known as Pteris cretica, originated from the Southern Mediterranean. It is an elegant, small house plant that’s easy to grow. It grows up to 6-in to 2-ft (15 cm – 60 cm), depending on the variety.

It is so adaptable to living indoors that earned it another common name, “Table Fern.”

Its fronds are somewhat fragile, so it’s a good idea to keep this fern where passersby won’t brush against its foliage. 

Furthermore, its decorative fern has an interesting shape and unusual foliage, making it a beautiful addition to any brightly lit room. It’s non-toxic to people and pets.

Care Instructions

To care for this plant, you must provide these essential needs. They include

A. Light

This plant tends to thrive in bright, indirect sunlight year-round. However, it can also thrive under fluorescent light. Avoid keeping the plant in direct sunlight as it will damage the plant as well as the leaves.

B. Water

Ensure that you keep the potting mix lightly moist at all times. It requires slightly less water than its rainforest cousins, so take care not to overwater. A Soggy potting medium will lead to root rot.

C. Soil Mix

You can use any good-quality potting mix with added perlite for good drainage.

D. Humidity

it prefers 50% relative humidity. When indoor air gets dry in winter, set a pot on a tray of wet pebbles or use a cool-mist room humidifier.

E. Temperature

Keep the plant in a room with a temperature level of 50-55°F/10-13°C during cold nights and warm days, a temperature between 60-70°F/16-21°C. 

F. Fertilizer

Brake ferns aren’t heavy feeders, but they do need a regular weak water-soluble fertilizer during the growing season. Feed every 2 weeks spring through fall with a balanced houseplant fertilizer at half the manufacturer’s recommended strength.

G. Repotting

Repot your plant during the spring, only when it gets too crowded. 

Brake Fern is slow-growing and prefers to be pot-bound. Keep the crown of the plant above the soil line when repotting. Don’t pack the soil down; this fern likes a little air around its roots. 

Use a pot with a drainage hole to avoid soggy soil.

H. Propagation

The best type of propagation is by division. Divide large plants in spring only when crowded; this fern is slow-growing and rarely needs to be divided.

I. Common Problems Of Brake Fern

The common problems include:

A. Brown Leaf Tips

This isn’t uncommon but in case you notice it on your plant leaves, you can remedy the problem by boosting the humidity for your fern. 

B. Drooping, Wilted Fronds

Drooping, wilted fronds are likely caused by underwatering. So you should try and use a container with drainage holes so you can water your fern thoroughly, avoiding any dry pockets in the soil. 

C. Pale Leaflets

Pale leaflets are a symptom of too much sunlight. 

You can resolve the problem by moving your houseplant away from the window. You don’t need to worry about this your brake fern being green as it will again after a few weeks in a shadier spot.

D. Pests

Scale insects tend to affect your ferns. You can rid of these pests by scraping them off. If the fronds are badly infested, you should cut them off. Don’t use an insecticide on ferns because their fragile fronds are easily damaged.

7. Button Fern

Also known as New Zealand, is a dependable plant that grows well indoors with little care. It grows Up to 1ft (30 cm).

It is an eye-catching plant with arching fronds densely covered with small, round leaflets with an accent that can brightly light any room. 

Place this fern on a plant stand among other tropical plants or put it in a hanging basket and allow the trail of leathery, button-shaped leaflets to cascade over the side.

Caring for button ferns is easy. Unlike most ferns, Pellaea tolerates fairly dry conditions. One thing this fern won’t tolerate is soggy soil.

Care Instructions

To care for and maintain this plant, you must provide the following essential needs such as:

A. Light

It thrives when placed in bright, indirect sunlight. Avoid exposing your plant to direct sunlight as it can damage the plant.

B. Water

Water thoroughly, then allow the top 1 in (2.5 cm) of soil to dry out slightly before watering again. Fronds that are yellow and wilted are a sign of overwatering. 

Cut back on water and trim off damaged fronds. Check the plant’s roots to see if they have rotted if they’re mostly black, get rid of them. It’s too far gone.

C. Soil

Grow in a peat moss-based potting mix with added perlite or sand to help with the drainage.

D. Humidity

Moderate to high which must be around 40-50% relative humidity. 

Raise the humidity around your fern with a cool-mist room humidifier or set the plant on a wet pebble tray.

E. Temperature

The average normal room temperature must be between 65-75°F/18-24°C.

F. Fertilizer

Feed the plant monthly with a 20-20-10 water-soluble fertilizer at half strength from spring till fall. Avoid feeding during winter as the plant will be dormant.

G. Repotting

Repot in spring, when the roots have filled the pot. Move the fern to a pot that’s only slightly larger. 

Use a pot with a drainage hole to prevent soggy soil. This is a good time to divide the fern if you want.

H. Propagation

The form of propagating this plant is through division. It must be done during spring. To do so, divide the plant into 2 or 3 sections with a sharp knife and pot them up. 

Be sure to get roots with stems attached. Fern spores can be propagated, but germination takes a few months and is not always reliable.

I. Common Problems Of Button Fern

The common problems include

A. Brown Leaf 

They are caused by high temperatures (above 75°F/24°C) or dry air. Trim off dry leaflets and raise the humidity around your plant.

8. Beach Spider Lilies

This amazing bulb-based plant “beach spider lily” is also known as Hymenocallis littoralis. Originated from southern Mexico and Central America. It enjoys environments that are downright aquatic and easy to maintain.

It looks like spiders crawling across your flower’s shelving unit all summer long, and provide your home with a sweet vanilla scent.

From the bulb, individual shoots grow up from the soil. Each bulb will produce multiple shoots, each with strap-shaped leaves that arch up to 2 feet (60 cm) in length.

Furthermore, white flowers emerge from the ends of these leaves in the middle of summer. The flowers possess a 5-7 inch (14 to 17 cm) long tube, which turns white near the final few inches. 

A tubular flower opens into a normal-looking white flower. From the edges of the flower, several narrow petals arch down for several inches around the plant, giving it a spider-like quality.

Care Instructions

The best way to care for this plant is by providing these essential needs such as:

A. Light

This plant requires partial shade to full sun. Make certain it can get enough light from the pot location.

B. Water

The plant demands wet conditions all year long. 

The bulbs can be started in nothing except water, but need to be moved to the soil once they begin to sprout. Soil should be kept moist, but never soggy. 

Do not allow standing water in the saucer underneath.

C. Soil Mix

These plants prefer a standard potting soil mixed with bark or pumice at a 1:1 ratio. 

The pH of the soil chosen needs to be between 5.0 and 7.5 for the continued health of the plant.

D. Humidity

This plant thrives with normal air humidity, as long as its soil is properly moist. If the soil has been allowed to dry out, the leaves and flowers may be misted with a spray bottle to combat dehydration effects.

E. Temperature

The Beach Spider Lily is capable of withstanding temperatures that drop into the 40ºF (4°C) range, and as high as 90ºF (32ºC). 

They must be protected against frosts by all means, or the plant will die back to the bulb stage.

F. Fertilizer

You may fertilize your plant once every two weeks with a diluted balanced fertilizer. Seaweed-based fertilizers have been reported to produce the best results.

G. Repotting

Every two years, this plant requires re-potting and an infusion of new soil. Move the plant to a larger pot, and mix in new soil to fill the gaps. This should be done when the plant is not flowering.

H. Propagation

This plant is propagated either by seed or by dividing rhizomes. Maturity from seed takes several years. It is easier to break off a piece of the bulb and propagate from it.

I. Common Problems Of Beach Spider Lilies

This plant species experiences very few problems in an average year. One of the most common situations is a lack of flowering or producing small flowers.

A. Lack Of Flowering

If your plant refuses to flower, give it a month-long break from fertilising. Reduce watering to keep the soil damp, and provide it with a darker place than usual.

If your plant still does not want to flower, check that its soil is wet enough and that it is receiving enough sunlight.

B. Pests 

If you take your plant outside at any point in time, you must check it daily. 

Snails and slugs enjoy eating the leaves of this plant and must be removed whenever they are present.

Conclusion

Adding house plants to your home or any other indoor spot have numerous benefits for both your physical and mental health. It can also add some level of charisma to your home.

However, with so many different house plants that start with B to choose from, you’re sure to find one that fits your unique style and care needs.